Specs
Features
Specs:
DRAPER 121024 VIC-12 Interface Control
Replaces The Standard Single-Station Control Switch Where A 12 Volt Trigger
Circuit Is Turned On To Lower The Product, And Turned Off To Raise The Product.
The VIC-12 Is Intended As The Sole Control, And Cannot
Be Used With Any Other Control, Except The Optional Override Switch (VIC-OS).
Single-Pole, Double-Throw (Common, Normally Closed, Normally Open).
Contacts: 240 Volts, 7 A; 30 VDC, 7 A, UL Recognized, CSA Recognized.
Coil: 12 VDC
A Relay With COM/NC/NO Contacts, And A 12 V Coil, Housed In A Metal Box.
Box Measures 3" x 4" x 5" And Hs Three Pigtails Leading From It:
a. A 7-1/2 ft. Black Cord With 3-Pronged Plug For Constant 115 VAC.
b. Two 22" Wire Leads (Orange & Brown) For Switched 12 VDC.
c. Four 6" Wire Leads For The Motor: Blue, Red, White, Green (Up, Down, Neut., Grnd).,
Features:
Used to Control One 115 Volt Motor By applying +12V to contact
Contacts: 240 Volts, 7 A; 30 VDC, 7 A, UL Recognized, CSA Recognized.
a. A 7-1/2 ft. Black Cord With 3-Pronged Plug For Constant 115 VAC.
b. Two 22" Wire Leads (Orange & Brown) For Switched 12 VDC.
c. Four 6" Wire Leads For The Motor: Blue, Red, White, Green (Up, Down, Neut., Grnd).,